Torbal AD50 Series Manual - Manual (Page 57)

Instruction Manual - TORBAL AD Series
Semi-Automatic and Manual:
When set to Semi-Automatic or Manual, the weighing result will remain displayed and it
must be manually cleared after the weight is removed from the pan. To clear the weighing
result press the “C” key. After the result has been cleared the scale must be tared. To tare
the scale press the “T” key.
To Clear To Tare
To exit Display Hold and switch to a different function, press “C” to clear the current
function and then press “F” to select a different function (follow Steps 1 through 3 from
Chapter 8 on page 44).
(E) Percent Weighing
Percent weighing is used to express a weight of an object as a percentage of a stored sample weight. To
use percent weighing follow the steps below.
1. Place a container on the pan.
57