Rice Lake 480 Legend Series Digital Weight Indicator Installation Manual - Manual (Page 10)

6 480 Operator’s Manual
1.5 Indicator Operations
Basic 480 operations are summarized below.
1.5.1 Menu
Press , MENU will be displayed.
Press , then or to select the following parameters.
• Audit Trail (See Section 1.5.10)
• Display Tare (See Section 1.5.7)
• Unit ID (See Section 1.5.11)
• Accumulator (See Section 1.5.12)
• Time and Date (See Section 1.5.13)
• Setpoints (See Section 1.5.14)
• Serial (See Section 3.2.2)
• Print Formats (See Section 7.0)
• Version (See Section 1.5.15)
• Misc. (Power Option) (See Section 3.2.5)
See Section 3.2 for more information.
Press repeatedly to return to the weigh mode.
Menus may be password protected. See Section 1.5.16 to setup a password.
1.5.2 Status Lights While in Various Menus
The left side LEDs light depending on where you are in the menu levels.
1.5.3 Zero Scale
1. In gross mode, remove all weight from the scale and wait for the LED to light.
2. Press . The LED lights to indicate the scale is zeroed.
See Section , INIZR parameter for Input Zero Range limitations.
1.5.4 Toggle Units
1. Press to toggle between primary and secondary units. The current unit LED will be lit.
1.5.5 Acquire Tare
1. Place container on scale and wait for the LED to light.
2. Press to acquire the tare weight of the container. Net weight is displayed and the T LED lights to
show the tare value was entered.
See Section 9.12 for Regulatory Mode Functions.
Gross/Brutto Level 1
Net Level 2
( ) Level 3
( ) Level 4
Table 1-2. Menu Levels
MENU
Note
ZERO
Note
UNIT
TARE