Rice Lake 120 Plus Digital Weight Indicator - Manual (Page 41)

Appendix 37
8.1.2 Configuration Commands
8.1.3 Format Commands
8.1.4 Calibration Commands
Command Description Values
GRADS Graduations 1 - 10000
ZTRKBND Zero Track Band OFF, 0.5D, 1D, and 3D
ZRANGE Zero Range 1.9%, 100%
MOTBAND Motion Band OFF, 1D, 3D, 5D, 10D, 20D, and 50D
OVRLOAD Overload FS+2%, FS+1D, FS+9D, and FS
DIGFLTR 1
DIGFLTR 2
DIGFLTR 3 Digital Filtering 1-3 1, 2, 4, 8, 16, 32, 64, and 128
DFSENS Digital Filtering Cutout
Sensitivity 2out, 4out, 8out, 16out, 32out, 64out, and 128out
DFTHRH Digital Filtering Cutout
Threshold NONE, 1DD, 2DD, 5DD, 10DD, 20DD, 50DD, 100DD, 200DD, and 250DD
INIZR Initial Zero Range 8%, 20%, 50%, 100%, OFF
REGULAT Regulatory Compliance NTEP, OIML, CANADA, NONE
Table 8-2. Configuration Commands
Command Description Values
PRI.DECPNT primary units decimal point position 8.88888, 88.8888, 888.888, 8888.88, 88888.8, and 888888
PRI.DSPDIV Primary units display division 1D, 2D, 5D, 10D, 20D, 50D, 100D, 200D, and 500D
PRI.UNITS Primary units LB, KG, OZ, G
SEC.DECPNT Secondary units decimal points position 8.88888, 88.8888, 888.888, 8888.88, 88888.8, and 888888
SEC.DSPDIV Secondary units display division 1D, 2D, 5D, 10D, 20D, 50D, 100D, 200D, and 500D
SEC.UNITS Secondary units LB, KG, OZ, G
DSPRAT Display rate 250 ms, 500 ms, 1 sec, 2 sec
HIRES Hires ON, OFF
Table 8-3. Format Commands
Command Description Values
WZERO Zero calibration -
WVAL Test weight value test_weight_value
WSPAN Span calibration -
REZERO Rezero -
LC.CD Set deadload coefficient value
LC.CW Set span coefficient value
LAT.CAL Latitude at calibration -
ELEV.CAL Elevation at calibration -
Table 8-4. Calibration Commands