Na vigation, Additional settings – Mercedes-Benz GL-Class 2012 COMAND Manual User Manual
Page 88
X
To scroll the map: press the =;
9: buttons.
X
To set the map scale: press the U or
T button.
The scale bar appears.
X
Press the U or T button again.
The map view is zoomed in or out.
X
To add an area to be avoided: press the
9 button.
A red square on the map delimits the area
to be avoided.
X
To set the size of the square: press the
U or T button.
The square is enlarged or reduced.
X
To confirm the setting: press the 9
button.
The list appears. The previously selected
area to be avoided has been added and
activated.
X
If you want to use list functions, proceed
according to the instructions described
under "Option 2: the list appears".
Option 2: the list appears
Example display: "Avoid area" list
X
Select
Avoid new area
using the
9: buttons and press the 9 button
to confirm.
The map with the crosshair appears.
X
Proceed according to the instructions
under "Option 1: the map appears" if you
wish to set a new area to be avoided.
The following illustration shows an example
with two areas that are to be avoided.
:
Area currently being avoided
;
New area to be avoided, the size of which
can still be adjusted
Switching an avoided area on/off
X
Select an entry in the list using the
9: buttons and press the 9 button
to confirm.
The avoided area is switched on O or off
ª depending on the previous status.
86
Additional settings
Na
vigation