Mercedes-Benz GL-Class 2012 COMAND Manual - Manual (Page 86)

X Select Standard Symbols , Personal
Symbols or No Symbols .
If you select Personal Symbols , the list of
points of interest appears.
X To switch the icon display on/off: select
the point of interest using the 9:
buttons and press the 9 button to confirm.
Depending on the previous setting, the
icons will be switched on O or off ª. You
can switch on the icon displays for more
than one point of interest.
i The list shows all icons that are contained
on the digital map across all countries.
However, not all points of interest are
available in all countries. As a result, certain
point of interest icons may not be displayed
on the map, even if the icon display is
switched on.
X
To exit the menu: press the =
or ; button.
Map information in the display
Displaying map information
During route guidance, you can have map
information displayed at the bottom edge of
the display.
X To show the menu: press the 9 button.
X Select Navi in the main menu bar using the
9=; buttons and press the 9
button to confirm.
X Select Information On Map and press the
9 button to confirm.
The ä icon indicates the current setting.
X Select Arrival Time / Distance ,
Current Street , Geo-coordinates or
None and press the 9 button to confirm.
X To exit the menu: press the =
or ; button.
Arrival time/distance to the destination
Arrival time/distance display switched on
:
Icon for destination
; Distance to the destination
= Icon for estimated time of arrival
? Estimated time of arrival
You can only see this display during route
guidance. When scrolling the map
(
Y
page 82), you will see data, e.g. road
names, depending on the crosshair position
if the digital map supports this data.
i During route calculation, or if the vehicle
is traveling on a non-digitized road, the
linear distance to the destination is shown.
In this case, the display will be grayed out.
Road display
Road display active
:
Road name or designation
84
Map operation and settings
Na
vigation