beautypg.com

Tech nical data, Service products and filling capacities – Mercedes-Benz SL-Class 2013 Owners Manual User Manual

Page 580

background image

VIN

X

Move the front-passenger front seat to its

rearmost position.

X

Fold up floor covering : in front of the

front-passenger seat.

You will see VIN ;.

The VIN can also be found in the following

locations:

R

on the lower edge of the windshield

(

Y

page 578)

R

on the vehicle identification plate

(

Y

page 577)

Engine number

:

Emission control information plate,

including the certification of both federal

and Californian emissions standards

;

Engine number (stamped into the

crankcase)

=

VIN (on the lower edge of the windshield)

Service products and filling

capacities

Important safety notes

G

WARNING

Service products may be poisonous and

hazardous to health. There is a risk of injury.
Comply with instructions on the use, storage

and disposal of service products on the labels

of the respective original containers. Always

store service products sealed in their original

containers. Always keep service products out

of the reach of children.

H

Environmental note

Dispose of service products in an

environmentally responsible manner.

Service products include the following:

R

Fuels

R

Lubricants (e.g. engine oil, transmission oil)

R

Coolant

R

Brake fluid

R

Windshield washer fluid

R

Climate control system refrigerant

Comply with all valid regulations with respect

to handling, storing, and disposing of service

fluids.
Components and service products must be

matched. You should therefore only use

products that have been tested and approved

by Mercedes-Benz.
Information about tested and approved

products can be obtained from an authorized

Mercedes-Benz Center or on the Internet at

http://bevo.mercedes-benz.com.
You can recognize service products approved

by Mercedes-Benz by the following

inscription on the containers:

R

MB-Freigabe (e.g. MB-Freigabe 229.51)

R

MB Approval (e.g. MB Approval 229.51)

Other designations or recommendations

indicate a level of quality or a specification in

accordance with an MB Sheet number (e.g.

578

Service products and filling capacities

Tech

nical

data