Mercedes-Benz SL-Class 2013 Owners Manual - Manual (Page 459)

External authorization
If COMAND does not find your Bluetooth ®
audio device, this may be due to particular
security settings on your Bluetooth ® audio
device. In this case, check whether your
Bluetooth ® audio device can locate
COMAND. The Bluetooth ® device name of
COMAND is MB Bluetooth .
X Switch on Bluetooth ® audio mode
(
Y
page 458).
X Select BT Audio by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
X Confirm Bluetooth Audio Device List
by pressing W the COMAND controller.
X To search: confirm Connect via BT
Audio Device by pressing W the
COMAND controller.
The duration of the search depends on the
number of Bluetooth ® audio devices within
range and their characteristics.
X
To authorize: start the authorization on
the Bluetooth ® audio device, see the
operating instructions of the Bluetooth ®
audio device.
After successful authorization, the
Bluetooth ® audio device is connected and
starts playing.
i With some Bluetooth ® audio devices,
playback must first be started on the device
itself, so that COMAND can play the audio
files.
Reconnecting a Bluetooth ® audio device
The Bluetooth ® audio profiles are connected
automatically under the following
circumstances:
R one of the last two mobile phones to have
been connected has also been used as a
Bluetooth ® audio player (if this function is
supported by the mobile phone).
R the mobile phone takes over the automatic
connection itself.
A Bluetooth ® audio player without telephone
functions is not automatically reconnected,
even if it was the last device connected.
If the
No Bluetooth Audio Device
Connected message appears, you have two
options to connect a Bluetooth ® audio
device:
Connecting last device
X Confirm Connect Last Device in the
basic display by pressing W the COMAND
controller.
If COMAND can locate the Bluetooth ®
audio device, it will be connected and start
playing.
i With some Bluetooth ® audio devices,
playback must first be started on the device
itself, so that COMAND can play the audio
files.
Connecting a device from a list
X Select BT Audio by turning cVd the
COMAND controller and press W to
confirm.
X Confirm Bluetooth Audio Device List
by pressing W the COMAND controller.
X Select a Bluetooth ® audio device by turning
cVd the COMAND controller and press
W to confirm.
If COMAND can locate the Bluetooth
®
audio device, it will be connected and start
playing.
i With some Bluetooth ® audio devices,
playback must first be started on the device
Audio
457
COMAND
Z