Comand, Telephone – Mercedes-Benz SL-Class 2013 Owners Manual User Manual
Page 397
X
Select the list symbol to the right of the
entry by sliding VY the COMAND
controller and press W to confirm.
X
Select
Assign Speed Dial Preset
and
press W to confirm.
The speed dial list appears. The selected
phone book entry is listed as the first entry.
The next available speed dial preset is
highlighted.
X
Select the speed dial preset by turning
cVd the COMAND controller and press
W to confirm.
The phone book entry is saved in the speed
dial preset.
Making a call via speed dial
The speed dial list contains stored phone
book entries (
Y
page 394).
Option 1:
X
Hold down one of the number keys for
longer than two seconds.
The telephone basic menu displays the
selected entry. This initiates dialing.
Option 2:
X
Call up the telephone basic menu
(
Y
page 383).
X
Select
Call Lists
by sliding VÆ and
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
X
Select
Speed Dial Preset List
by
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
X
Select preset and press W to confirm.
The telephone basic menu displays the
selected entry. This initiates dialing.
Deleting a speed dial number
X
To delete a speed dial number: select
Delete Speed Dial Preset
in the Speed
dial menu by turning cVd the COMAND
controller and press W to confirm.
The speed dial number is deleted.
X
To delete all speed dial numbers: select
Delete All Speed Dial Presets
in the
Speed dial menu by turning cVd the
COMAND controller and press W to
confirm.
You will be asked whether you want to
continue.
X
Select
Yes
or
No
and press W to confirm.
If you select
Yes
, all speed dial presets will
be deleted from the speed dial list.
If you select
No
, the process will be
canceled.
Text messages
Information and requirements
If the above conditions are met, new incoming
text messages appear in the COMAND text
message inbox. In addition, a tone sounds
and the / symbol appears. The symbol is
no longer displayed once you have read the
text message. The ú mail symbol is
displayed if the text message memory is full.
The symbol is no longer displayed once you
delete at least one text message.
i
COMAND may not load all of the most
recent text messages:
This may occur in exceptional cases, for
example when using certain mobile
Telephone
395
COMAND
Z