Mercedes-Benz SL-Class 2013 Owners Manual - Manual (Page 386)

X Select Reception Volume or
Transmission Volume and press W to
confirm.
X Select a volume setting by turning cVd the
COMAND controller.
X To close the setting scale: press W or
slide XVY.
i Incorrect settings may have an impact on
the quality of calls.
Using the telephone
Incoming call
Accepting a call
Example: incoming call
X To accept: confirm Accept by pressing
W.
or
X Press the 6 button on COMAND or on
the multifunction steering wheel.
i You can also accept the call by voice
command using the Voice Control (see the
separate operating instructions).
Once you have accepted the call, you can use
hands-free mode.
The call volume can be adjusted
(
Y
page 295).
Other functions during a call (
Y
page 385).
If the phone number of the caller is
transferred, it appears in the display.
If an entry for the caller exists in the phone
book, you will also see the name.
If the phone number is not transferred or if
the "Hide data" function is active, Unknown is
shown in the display.
i You can also accept a call as described
above when another main function is
switched on in COMAND. Once you have
accepted the call, the display switches to
telephone mode. After the call is finished,
you see the display of the previous main
application again.
The display does not switch to telephone
mode if you:
R press the % back button next to the
COMAND controller and then
R accept the call using the 6 button on
the multifunction steering wheel
Rejecting a call
X To reject: select Reject by turning cVd
the COMAND controller and press W to
confirm.
or
X Press the ~ button on COMAND or on
the multifunction steering wheel.
Making a call
Using the number keypad
X Call up the telephone basic menu
(
Y
page 383).
X
Enter the digits using the number keypad.
X To connect the call: press the 6
button on COMAND or on the multifunction
steering wheel.
Using the telephone basic menu
X Call up the telephone basic menu
(
Y
page 383).
X
Select the digits one by one by turning
cVd and sliding ZVÆ the COMAND
controller and press W to confirm.
384
Telephone
COMAND