beautypg.com

Comand, Telephone – Mercedes-Benz SL-Class 2013 Owners Manual User Manual

Page 379

background image

Call disconnection while the vehicle is

in motion

A call may be disconnected if:

R

there is insufficient network coverage in

certain areas.

R

you move from one transmitter/receiver

area (cell) into another and no channels are

free.

R

you use a SIM card which is not compatible

with the network available.

Operating options

You can operate the telephone by:

R

using the COMAND controller:
Turn cVd
Slide XVY or ZVÆ
Press W

R

using the 6 or ~ button and using

the telephone keypad on COMAND

R

using the 6 or ~ button on the

multifunction steering wheel

R

using the Voice Control System (see the

separate Voice Control System operating

instructions)

Unless stated otherwise, the descriptions and

illustrations in this section refer to COMAND.

Function restrictions

The telephone is not ready for use in the

following situations:

R

the telephone automatically tries to log on

to a network. If no network is available, you

may not be able to make a "911"

emergency call. If you attempt to make an

outgoing call, the

No Service

message will

appear for a short while.

911 emergency call

G

WARNING

The 911 emergency call system is a public

service. Using it without due cause is a

criminal offense.

The following requirements must be fulfilled

for a 911 emergency call:

R

the mobile phone must be switched on.

R

a network must be available.

R

a valid and operational SIM card must be

inserted in the mobile phone.

R

the mobile phone is connected to COMAND

via Bluetooth

®

.

If you cannot make an emergency call, you

must arrange rescue measures yourself.

X

Enter the number on COMAND

(

Y

page 384).

X

Press 6.

The telephone makes the connection.

X

Wait until the emergency call center

answers and describe the emergency

situation.

Telephony via the Bluetooth

®

interface

Conditions

For telephony via COMAND's Bluetooth

®

interface, a Bluetooth

®

-capable mobile

phone is required.
On COMAND

X

Activate the Bluetooth

®

function in

COMAND (

Y

page 306).

On the mobile phone

X

Switch on the mobile phone and enter the

PIN when prompted to do so (see the

mobile phone operating instructions).

X

Activate Bluetooth

®

functions and, where

necessary, Bluetooth

®

visibility on the

mobile phone (see the mobile phone

operating instructions).

The battery of the mobile phone should

always be kept sufficiently charged in order

to prevent malfunctions.

Telephone

377

COMAND

Z