Comand, Navigation – Mercedes-Benz SL-Class 2013 Owners Manual User Manual
Page 332
Waypoint menu with two waypoints
Editing waypoints
You can:
R
change waypoints
R
change the sequence in the waypoint menu
R
delete waypoints
To change the sequence, both waypoints
must be entered.
X
To change waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
X
Select
Edit
and press W to confirm.
X
Use one of the destination entry options
offered.
X
To change the sequence of the
waypoints: select
Swap
in the waypoint
menu by turning cVd the COMAND
controller and press W to confirm.
The entries are swapped.
X
To delete waypoints: select the symbol
for waypoint 1 or 2 in the waypoint menu
by turning cVd the COMAND controller
and press W to confirm.
X
Select
Delete
and press W to confirm.
i
You can use this menu item to delete a
waypoint directly after entry.
Accepting waypoints for the route
X
Select
Start
in the waypoint menu by
turning cVd the COMAND controller and
press W to confirm.
The route is calculated with the entered
waypoints.
i
The
Continue
menu item is displayed
instead of
Start
if
Calculate
Alternative Routes
is activated in the
navigation menu (option 2) (
Y
page 347).
In the example, there are both waypoints 1
and 2.
Entering a point of interest
Calling up the points of interest menu
Example: POI menu
POIs are predefined destinations within
categories, e.g. a gas station in the
AUTOMOTIVE
category.
X
To switch on navigation mode: press the
Ø function button.
330
Navigation
COMAND