Mercedes-Benz SL-Class 2014 Owners Manual - Manual (Page 479)

X Select Audio Audio in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
If AUX mode was the last mode selected, it
will now be active.
If another audio source is switched on, you
can now switch to audio AUX mode in the
audio menu.
X Select Audio Audio using ZV and press W to
confirm.
The audio menu appears.
X Select Aux Aux using cVd and press W to
confirm.
The audio AUX menu appears. The medium
in the external audio source is played if the
source is connected and playback
selected.
Please see the respective operating
instructions for how to operate the external
audio source.
Information on:
R Volume settings (
Y
page 299)
R Sound settings (
Y
page 300)
Increasing the volume on COMAND
X Select Volume Volume in the AUX display by turning
cVd the COMAND controller and press
W to confirm.
A menu appears. The # dot indicates the
current setting.
X Select Standard Standard or Boost Boost and press W to
confirm.
Standard Standard : the volume of the external audio
source is adjusted to a standard value.
Boost Boost : the volume of the external audio
source is raised by approximately 10 dB.
A device which is connected as an external
audio source may seem quieter or louder in
the vehicle, or the usual maximum volume
cannot be achieved. On some devices, it is
possible to adjust the volume separately. In
this case, start at a medium volume and
increase it gradually. This enables you to
determine whether the system is able to play
the music at high volume without distorting
it.
Video
Your COMAND equipment
These operating instructions describe all the
standard and optional equipment for your
COMAND system, as available at the time of
going to print. Country-specific differences
are possible. Please note that your COMAND
system may not be equipped with all the
features described.
Video
477
CO
MA
ND
Z