Mercedes-Benz SL-Class 2014 Owners Manual - Manual (Page 397)

The system behavior after accepting the
incoming call depends on your mobile phone.
R The mobile phone supports the call waiting
function (via Bluetooth ® ) when:
the previously active call is held. You can
then switch back and forth between both
calls (toggling) (
Y
page 395).
R The mobile phone does not support the call
waiting function (via Bluetooth ® ) when:
the previously active call is ended.
This is also the case if you accept the
waiting call using the Voice Control System
(see the separate operating instructions).
The COMAND display changes. If you
continue to operate functions on the mobile
phone, the COMAND display may differ from
that of the mobile phone.
Making a second call
If the following requirements are met, you can
make another call while on the phone with
someone else:
R the function has to be supported by the
mobile phone network.
R the mobile phone has to support the
connection of a further call via Bluetooth ® .
This action puts the previous call on hold if
the mobile phone supports this function.
R the appropriate setting has to be activated
on the mobile phone.
: Symbol for making a second call
X Select symbol : by turning cVd the
COMAND controller and press W to
confirm.
or
X Press the 6 button on COMAND.
X
Enter the phone number:
R manually (
Y
page 392)
R using the phone book (
Y
page 397)
R using the call lists (
Y
page 400)
R using speed dial (
Y
page 393)
Call waiting and conference calls
You can switch back and forth between two
calls with the call waiting function. The
function is available if your mobile phone
supports the toggling function (via
Bluetooth ® ).
You can interconnect various callers to create
a conference call with the Conference Conference
function.
You can use the function if you are answering
a second call or making a second call while
talking to someone else.
: Active call
; Call on hold
= To interconnect the call on hold and the
active call to create a conference call.
Telephone
395
COMAND
Z