Coman d, Navigation – Mercedes-Benz SL-Class 2014 Owners Manual User Manual
Page 356
Cancel route guidance
Canceling or continuing route guidance
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X
Select
Destination
Destination
in the navigation
system menu bar by turning cVd the
COMAND controller and press W to
confirm.
X
To cancel route guidance: select
Cancel
Cancel
Route Guidance
Route Guidance
and press W to confirm.
or
X
To continue route guidance: select
Continue Route Guidance
Continue Route Guidance
and press W
to confirm.
COMAND calculates the route.
Destination or area of destination
reached
When you reach your destination, COMAND
displays a checkered flag and route guidance
is automatically ended.
If the destination is not in close proximity to
a digitized street, the
Area of
Area of
destination reached
destination reached
message appears
when the destination is reached.
Influencing route guidance
Avoiding a section of the route blocked by
a traffic jam
This function blocks a section of the route
ahead of you. You can set the length of the
blocked route section. If possible, COMAND
calculates a detour around the blocked
section of the route.
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X
Select
Route
Route
in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
X
Select
Detour
Detour
and press W to confirm.
X
To block a section of the route: select
Longer
Longer
or
Shorter
Shorter
repeatedly and confirm
using W until the desired section has been
selected.
i
The total length of the section that can be
blocked is defined by the digital map. The
menu items are available accordingly.
X
To start route calculation: select
Start
Start
and press W to confirm.
X
To delete the blocked section: select
Delete
Delete
while the message is shown and
press W to confirm.
COMAND calculates the route without the
block.
Selecting an alternative route
With the "Alternative route" function, routes
other than the original one can be calculated.
Routes 1 to 3 are calculated with the current
settings for the route type and route options
and are shown with a dark blue line
(
Y
page 325).
Route 4 is the economic route (eco route) and
is shown with a green line.
On the right-hand side, you will see
information on the currently selected
alternative route, e.g. distance, estimated
remaining driving time and estimated time of
arrival. Route sections used (e.g. highways,
tunnels) are displayed as symbols.
Option 1
X
To switch to navigation mode: press the
Ø button.
X
To show the menu: press W the COMAND
controller.
X
Select
Route
Route
in the navigation system
menu bar by turning cVd the COMAND
controller and press W to confirm.
354
Navigation
COMAN
D