Mercedes-Benz SL-Class 2014 Owners Manual - Manual (Page 324)

Resetting all adjustments
X Select the seat (
Y
page 319).
X Select Reset All Reset All by turning cVd the
COMAND controller and press W to
confirm.
A prompt appears.
X Select Yes Yes or No No and press W to confirm.
If you select No No , the process will be
canceled.
After you select
Yes Yes , all seat adjustments
are reset to the default values (factory
setting).
Rear view camera
The rear view camera is only an aid. It is not
a replacement for your attention to your
immediate surroundings. You are always
responsible for safe maneuvering and
parking. When maneuvering or parking, make
sure that there are no persons, animals or
objects in the area in which you are
maneuvering.
The image from the rear view camera is
shown in the COMAND display when reverse
gear is engaged if:
R your vehicle is equipped with a rear view
camera.
R COMAND is switched on
R the Activation by R gear Activation by R gear function is
activated.
If the function is activated, the COMAND
display will automatically switch back to the
previously selected display as soon as you
shift out of reverse gear.
i For further information on the rear view
camera, see separate vehicle Operator's
Manual.
X Press the W function button.
The system menu appears.
X Select Settings Settings by turning cVd the
COMAND controller and press W to
confirm.
X Select Rear Rear View View Camera Camera and press W to
confirm.
X Select Activation by R gear Activation by R gear and press
W to confirm.
The function is switched on O or off ª,
depending on the previous status.
Night View Assist Plus
On vehicles with Night View Assist Plus you
can have the image from Night View Assist
Plus shown on the COMAND display.
X Switch on COMAND (
Y
page 299).
X Activate Night View Assist Plus, see the
separate operating instructions.
The image from Night View Assist Plus
appears in the COMAND display.
X
To adjust the brightness: select
Brightness Brightness by turning cVd the COMAND
controller and press W to confirm.
X Turn cVd the COMAND controller and
press W to confirm.
X Switching automatic activation on/off:
select Night View Assist Auto. Night View Assist Auto.
Activation Activation and press W to confirm.
Switch the option on O or off ª.
Option switched on: while using other
functions e.g. the navigation system, Night
View Assist Plus is active in the
background. In the dark, in unlit
surroundings and at speeds in excess of
37 mph (60 km/h), the Night View image
322
Vehicle functions
CO
MA
ND