Mercedes-Benz SL-Class 2014 Owners Manual - Manual (Page 311)

Switching on SPLITVIEW
X Select System System in the main function bar by
turning cVd the COMAND controller and
press W to confirm.
X Select ; in the menu bar and confirm.
SPLITVIEW symbol : appears in the
display, and display ; switches to Off Off .
The front passenger sees the display of the
function last activated. If the switch-on
time was longer than 30 minutes
previously, the display from the driver's
side is shown.
Switching off SPLITVIEW
X Select ; in the menu bar by turning
cVd the COMAND controller and press
W to confirm.
SPLITVIEW symbol : disappears from the
display. Display ; switches to On On .
i If COMAND has already been switched
on, you can also use the remote control to
switch SPLITVIEW on and off. Make sure
that the SPLITVIEW symbol is set on the
remote control thumbwheel (
Y
page 487).
The SPLITVIEW display remains on for
approximately 30 minutes after the SmartKey
has been turned to position 0 in the ignition
lock. After this time or after the SmartKey has
been removed, the settings on the front-
passenger side are saved for approximately
30 minutes longer. After this period,
reactivation on the front-passenger side
means that the settings from the driver's side
will be used.
Transferring the driver's website
X To switch on SPLITVIEW: select System System
from the main function bar by turning
cVd the COMAND controller and press
W to confirm.
X
Select ; in the menu bar and confirm.
SPLITVIEW symbol : appears in the
display, and display ; switches to Off Off .
X Select ® in the main function bar with the
remote control.
A carousel view appears with the following
options:
R Operator's Manual Operator's Manual
R Enter URL Enter URL
R Internet Favorites Internet Favorites
R Mercedes-Benz Apps Mercedes-Benz Apps
R Internet Radio Internet Radio
R Mercedes Mobile Website Mercedes Mobile Website
R Transfer Driver's Website Transfer Driver's Website
X Select Transfer Transfer Driver's Driver's Website Website with
the remote control.
You see the last website called up by the
driver.
Transferring a destination to the driver
Using SPLITVIEW you can select a destination
from the front-passenger side and transfer
this to the driver's side.
X To switch on SPLITVIEW: select System System
from the main function bar by turning
At a glance
309
COMAND
Z