Losi LOSB9605 - Manual (Page 3)

J. Charge Lead Output Connection (-)
Negative output lead plugs in here; uses standard banana plug socket.
Charger Control Setup:
By following the sample LCD screens below you will be able to Control the functional
settings of the charger. Use the “Increase” and “Decrease” buttons to select values.
Press START key to enter Setup then proceed below:
Beginning LCD display
Select ON and set the temperature in Celsius to the one that you would like the
charger to stop charging the battery on. Set to 32 Celsius as a default value, see
table below for reference.
Fahrenheit Celsius
70 21
75 24
80 27
85 29
90 32
95 35
100 38
110 43
115 46
120 49
125 52
Time limit to prevent overcharging a battery if other controls were to fail; set time in
minutes for maximum charge time. Set to 65 minutes as a default value.