Losi LOSB9605 - Manual (Page 2)

Physical Overview:
A.
Temperature Sensor Input (Optional)
This sensor can be used to monitor the temperature of the battery and stop
charging if the temperature exceeds a preset value. Control temperature is
set through the charger control setup.
B.
DC Input
Connection for a 12V car battery or hobby grade power supply. Input voltage
should be between 11-16V
C. Stop Button
Pressing Stops charging and is used to return from program mode.
D. Decrease Select Button
Pressed to decrease value presented in display.
E. Increase Select Button
Pressed to increase value presented in display.
F. Start Button
Pressing Starts charging and is used to navigate/confirm program settings.
G. LCD Display
Large 64 x 14.5mm display presents charger’s functions and programming
options.
H.
Cell Balance Connector
8-pin connector used with supplied leads to balance charge batteries.
I. Charge Lead Output Connection (+)
Positive output lead plugs in here; uses standard banana plug socket.