Kontron NSC2U IP Network Server - Manual (Page 9)

Kontron IP Network Server NSC2U
December 2009 Product Guide, rev. 1.4
9
Introduction—NSC2U Server
1 Introduction
1.1 About this Manual
Thank you for purchasing and using the Kontron IP Network Server NSC2U.
This manual is for trained system technicians who are responsible for troubleshooting,
upgrading, and maintaining this server. This document provides a brief overview of the
features of the system, a list of accessories or other components you may need,
troubleshooting information, and instructions on how to add and replace components
on the NSC2U Server.
Always be sure to check the Support web site at
http://us.kontron.com/support/ for
the latest version of this manual with possible updates since this version was published.
(Search for NSC2U, click on Manuals, then Product Guide.)
1.1.1 Manual Organization
Chapter 2 provides a brief overview of the NSC2U Server. In this chapter, you will find
a list of the server board features, chassis features, illustrations of the product, and
product diagrams to help you identify components and their locations.
Chapter 3 provides instructions on adding and replacing hot-swappable and standard
components such as processors and memory DIMMs. Use this chapter for step-by-step
instructions and diagrams for installing or replacing components.
Chapter 4 provides instructions on adding optional ccomponents such as PCI add-in
cards, I/O expansion modules, hardware RAID5 components, and optical devices. Use
this chapter for step-by-step instructions and diagrams for installing components.
Chapter 5 provides instructions on replacing components such as fans, boards, the
drive bay assembly, and the battery. Use this chapter for step-by-step instructions and
diagrams for replacing components.
Chapter 6 provides instructions on using the utilities that are shipped with the board or
that may be required to update the system. This includes how to navigate through the
BIOS (Basic Input/Output System) setup screens, how to perform a BIOS update, and
how to reset the password or CMOS (Complementary Metal Oxide Semiconductor).
Information about the specific BIOS settings and screens is available in the
Intel ® Server Board S5000PAL Technical Product Specification.
Chapter 7 provides troubleshooting information. In this chapter, you will find BIOS
error messages and POST (Power-on Self Test) code messages. You will also find
suggestions for performing troubleshooting activities to identify the source of a
problem.
1.2 What Your Server Includes
Your Kontron IP Network Server NSC2U includes the following components: