Kontron NSC2U IP Network Server - Manual (Page 80)

NSC2U Server—Optional Component Installations
Kontron IP Network Server NSC2U
Product Guide, rev. 1.4 December 2009
80
4.6.3 Install the Front Panel Escutcheon and Connect the Fiber Cables
15. Remove the screws holding the blank front panel cover (letter “A” in Figure 64 ).
Slide the blank cover off (“B”).
16. Install the interposer LED board onto the fiber escutcheon as shown in Figure 65 .
Figure 64. Removing the Blank Front Panel Cover
TS000525
A
B
Figure 65. Installing the Interposer LED Board
TS000526