Kontron NSC2U IP Network Server - Manual (Page 39)

Kontron IP Network Server NSC2U
December 2009 Product Guide, rev. 1.4
39
Server Component Installations and Upgrades—NSC2U Server
Note: The server board supports single DIMM mode operation. Kontron will only validate and
support this configuration with a single 512 MB x8 FB-DIMM installed in DIMM slot A1.
3.4.2.5 Non-mirrored Mode Memory Upgrades
The minimum memory upgrade increment is two DIMMs per branch. The DIMMs must
cover the same slot position on both channels. DIMM pairs must be identical with
respect to size, speed, and organization. DIMMs that cover adjacent slot positions do
not need to be identical.
When adding two DIMMs to the configuration shown in Figure 21 , the DIMMs should be
populated in DIMM slots C1 and D1 as shown in Figure 22 . Populated DIMM slots are
shown in grey.
Figure 21. Recommended Minimum Two DIMM Memory Configuration
Figure 22. Recommended Four DIMM Configuration