Kontron KTLX800-pITX User Manual
Page 46

KTD-S0022-C
Page 41
Setup Guide
KTLX800/pITX User's Guide
Submenu
20.5.2 Onboard Device Configuration
Feature
Option
Description
8
Chipset Configuration
Submenu
Set chipset options (UART)
8
n
S-ATA Configuratio
Submenu
Configure the S-ATA support
8S
on
DIO Configurati
Submenu
Configure the SDIO ports
8LAN Configuration
Submenu
Configure the PCI LAN controller
8USB Configuration
Submenu
Configure the USB support
1 Chipset Configuration Submenu
20.5.2.
Feature
Option
Description
UART Port 1
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Selects I/O base and IRQ of the first serial port respectively
disables the port
UART Port 2
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Selects I/O base and IRQ of the second serial port respecti-
vely disables the port
20.5.2.2 S-ATA Configuration Subme
nu
Feature
Option
Description
Drive Type
N / A
Show the type of the S-ATA drive
Drive Vendor/Model
N / A
Show the drive manufacturer and drive name
Drive Size
N / A
Display the calculated size of the drive
Max. UDMA Mode
N / A
Display the highest supported Ultra DMA mode
S-ATA Controller
Disabled
Enabled
Enable or disable the S-ATA controller