Kontron KTLX800-pITX - Manual (Page 32)

KTD-S0022-C Page 27 Digital I/O Interface
KTLX800/pITX User's Guide
open
ended) is deliverable from KONTRON (KAB-GPIO-PROTO-10, part number 62038).
13.3 Connector (Higher 8 Bits)
The higher digital I/O pins are available through the connector J1302 (10 pins). An interface cable (
Header Pin Signal Name Function
VCC 1) 1 Power +3.3V
2 GPIO12 Bidirectional I/O 12
3 GPIO8 Bidirectional I/O 8
4 GPIO13 Bidirectional I/O 13
5 GPIO9 Bidirectional I/O 9
6 GPIO14 Bidirectional I/O 14
7 GPIO10 Bidirectional I/O 10
8 GPIO15 Bidirectional I/O 15
9 GPIO11 Bidirectional I/O 11
1
GND Ground 10
13.4 Connecto
When the board is sh O pin are routed to a in Mo connector on the RTC
battery module. The onboard connector J1300 can be used when the RTC battery module is disassembled.
r Redirection
ipped the lower digital I/ s 10 p lex