Kontron KTLX800-pITX - Manual (Page 27)

KTD-S0022-C Page 22 LAN Controller
KTLX800/pITX User's Guide
le the LAN PXE Boot in the BIOS Setup to allow the system to boot up via a
network connection from a PXE server.
le the LAN PXE Boot in the BIOS Setup to allow the system to boot up via a
network connection from a PXE server.
10 LAN Controller AN Controller
The KTLX800/pITX uses an Intel ® 82551ER PCI Fast Ethernet controller. The controller support 10/100
Base-T interfaces. The device auto-negotiates the use of a 10 or 100 Mbps connection.
Additionally it is possible to enab
The KTLX800/pITX uses an Intel ® 82551ER PCI Fast Ethernet controller. The controller support 10/100
Base-T interfaces. The device auto-negotiates the use of a 10 or 100 Mbps connection.
Additionally it is possible to enab
Attention: The Intel WIN XP driver doesn't support the Wake On LAN (WOL) feature.
10.1 Conne
The LAN interface is available through the stan J45 connector J120 s).
ctor
dard R 0 (8 pin
Pin Si Name gnal Function Header
TXD+ 1 10/100 transmit (positive)
2 TXD- 10/100 transmit (negative)
3 RXD+ 10/100 receive (positive)
4 GND Ground (shield)
5 GND Ground (shield)
1
RXD- 6 10/100 receive (negative)
GND 7 Ground (shield)
GND 8 Ground (shield)
10.2 Connector LED Definition
The network transmission rate and activity are indicated by two LEDs.