Interface (s-ata), 9serial-ata, 1 connector – Kontron KTLX800-pITX User Manual
Page 26

KTD-S0022-C
Page 21
Serial-ATA Interface (S-ATA)
KTLX800/pITX User's Guide
Interface (S-ATA)
uiring only 6 wires.
9
he S-ATA interface is available through the standard L-type connector J1400 (7 pins). A S-ATA interface
cable is deliverable from KONTRON (KAB-SATA-1, part number 96079-0000-00-1).
9
Serial-ATA
The KTLX800/pITX has realized one S-ATA I port. Serial-ATA connections boost the transfer rate theoreti-
cally up to 150 MB/sec. In addition it changes the parallel interface requiring 40 separate wires to a serial
interface req
.1
Connector
T
Header
Pin
Signal Name
Function
1
GND
Ground
2
TX+
Transmit (positive)
3
TX-
Transmit (negative)
4
GND
Ground
5
RX-
Receive (negative)
6
RX+
Receive (positive)
1
7
GND
Ground
This manual is related to the following products: