3 sd card identification – Kontron KTLX800-pITX User Manual
Page 29

KTD-S0022-C
Page 24
Secure Digital I/O and Multimedia Card
KTLX800/pITX User's Guide
Note:
1)
To protect the external power lines of peripheral devices make sure that
N 60950.
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/E
Attention: Only the microSD card socket is bootable - the second SDIO pin header J1701 serves as a storage interface
11.3 SD Card Identification
The boot settings menu does not include a special entry for SD Cards. They are always identical with an USB
ant to boot from SD Card.
harddisk. Use the setting 'USB HDD' if you w
This manual is related to the following products: