Kontron KTLX800-pITX - Manual (Page 19)

KTD-S0022-C Page 14 Graphics Interface
KTLX800/pITX User's Guide
I30)
nector represents the JILI interface. The implementation of this subsystem complies
with the JILI specification of KONTRON Technology A/S. A variety of cables for different display types are
available from KONTRON. Please refer to the actual
Display Cable Guide on the same product web site.
7.2 Flat Panel Connector (JIL
The LVDS interface for the flat panel is available through the J1601 connector (30 pins) on the bottom side
of the board. This con
Header Pin Signal Name Function
FTX0- 1 First channel data output 0 (negative)
2 FTX0+ First channel 0 (positive) data output
1
3 FTX1- First chann negative) el data output 1 (
4 FTX1+ First chan ositive) nel data output 1 (p
5 FTX2- First chan negative) nel data output 2 (
6 FTX2+ First chann (positive) el data output 2
7 GND Ground
8 FTXC- First channel clock output (negative)
9 FTXC+ First channel clock output (positive)
10 FTX3- First channel d t 3 (negative) ata outpu
30
FTX3+ 11 First chann (positive) el data output 3
RSVD 12 Reserved
RSVD 13 Reserved
GND 14 Ground
RSVD 15 Reserved
RSVD 16 Reserved
GND 17 Ground
RSVD 18 Reserved
RSVD 19 Reserved
RSVD 20 Reserved
RSVD 21 Reserved
RSVD 22 Reserved
RSVD 23 Reserved
GND 24 Ground
SDA 25 I2C data
DATAENA 26 Panel power output
SCL 27 I2C clock
VCC 1) 28 - 30 Power +3.3V or +5V