Canon EOS 1 V HS User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DEP Depth-of-field AE
i c
I C 3
Aim the selected focusing point at
the nearest subject you want in
focus, then press the shutter
button. (66)
►
The in-focus indicator lights and
dEP !
is displayed.
• If two focusing points are active
(-^p.43), both focusing points will be
used for depth-of-field AE.
Use the same focusing point to
aim at the farthest subject you
want in focus and press the
shutter button. (66)
►
The in-focus indicator lights and
dEP d
is displayed.
• You can also reverse the above two
steps.
Compose the picture and press
the shutter button halfway to
check that the shutter speed and
aperture are not blinking. (66)
► The point of focus is set between the
two dEP points. The aperture
required to achieve the desired depth
of field and a suitable shutter speed
are set automatically.
• If you release the shutter button,
dEP
and the aperture will be
displayed.
• The exposure setting is set when the
picture is taken.
Take the picture.
62