Troubleshooting guide – Canon EOS 1 V HS User Manual
Page 124
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If the problem
still persists, take the camera to your nearest Canon Service Center.
Canon Service Centers are listed on the back of this booklet.
Nothing is
displayed
on the LCD
panel.
< © >
is
►
Set the
< © >
switch to
The battery is exhausted.
►
Replace the battery with a new one. (^p.19, 20)
The battery has been installed incorrectly.
►
Install the battery correctly. (^p.19)
The camera’s
Custom
Function
cannot be set.
< © >
is
►
Set the
< © >
switch to
<
ON
> .
(-^p. 14)
The
< ^ >
switch is
►
Set the
< ^ >
switch to
<
ON
> .
{^p. 17)
AF does not
work when
the shutter
button is
pressed
halfway.
< © >
is
►
Set the
<
©
>
switch to
<
ON
> .
(->p. 14)
The lens focus mode is set to
M f
(or
M ) .
►
Set the lens focus mode to
A F
(or
A ) .
(-^p.21)
C.Fn-4 is set to 1 or 3.
►
Set C.Fn-4 to 0. (^p.100)
The shutter
does not
work.
The
<
m m m >
icon blinks on the LCD panel.
►
Take out the film and load it correctly. (->p.25, 26)
The
<
Q
>
icon blinks on the LCD panel.
►
Replace the battery. (^p.19)
The
<(§k>
icon blinks while the rewound film is still in the
camera.
►
Replace with a new roil of film, (-^p.28, 25)
The in-focus indicator in the viewfinder blinks and focus
cannot be achieved.
►
Select another focusing point. (->p.38) If focus still cannot
be achieved, focus manually. (->p.48)
122