Canon EOS 1 V HS User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom Function Settings
C.Fn-2
Film leader position
When the film rewind is completed, you can leave out the film leader.
C.Fn
Function
No.
Description
C.Fn-2 Film leader position
0
u
Rewinds film leader into the
cartridge.
1
l^
Leaves film leader outside the
cartridge.
C.Fn-2-1;
This is convenient if you develop your own film.
Q With C.Fn-2-1 set, the shutter speed will always be 1/8000 sec. when you
release the shutter with the camera back open.
C.Fn-3
______ DX-coded film speed setting method
This can prevent the camera from automatically setting the ISO film speed.
C.Fn
Function
No.
Description
C.Fn-3
Automatic setting of
DX-coded film speed
0
ISO
DX
Enabled
1
ISO
M
Disabled
C.Fn-3-1; This enables you to set the film speed manually, (^p.73)
This
ensures that the desired film speed is set.
You need not
keep setting the film speed manually each time you load the
film.
99