Remove the grip, Open the cover, Install the battery – Canon EOS 1 V HS User Manual
Page 19: Reattach the grip
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Battery and Checking the Battery Level
Installing the Battery
The battery is housed in the camera grip.
Remove the grip to install one
2CR5 lithium battery.
• For the EOS-1 V FIS, see page 115.
Remove the grip.
• Use a coin to turn and loosen the grip
screw as shown by the arrow in the
figure. Slide off the grip downward.
Open the cover.
install the battery.
• Install the battery so that the battery
contacts are on the right and bottom.
Then close the cover.
Reattach the grip.
• Reattach the grip to the camera, then
turn the grip screw to tighten
securely.
V
Lithium batteries may not be available in certain areas. Carry a spare battery
when going on a trip or when you will use many rolls of film.
19