Press the < af > and < [h > buttons simultaneously, Setting the film speed, Press the – Canon EOS 1 V HS User Manual
Page 27: And < [h > buttons simultaneously
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading and Unloading Film
• If the film is not loaded properly, the film transport indicator
and the shutter will not work. Reload the film properly.
• Infrared film can also be used, (-^p.82)
i> will blink
^ In hot and humid environments, do not remove the film packaging until you are
ready to load the film.
The frame counter can either count up or count down. (C.Fn-8-1^p.103)
Setting the Film Speed
The camera sets the film speed automatically within ISO 25 - 5000 with the
film's DX code.
Press the <
af
> and < [H > buttons
simultaneously.
► The LCD panel will display the
ISO
icon and the film speed.
li If the film speed displayed does not match the film speed or if the film is not DX-
coded, see “Setting the Film Speed Manually" on page 73.
C.Fn 3 can prevent the ISO film speed from being set automatically with the
DX code, (-^p.99)
27