Canon EOS 1 V HS - Manual (Page 43)

Focusing Point Registration and Switching
A focusing point can be registered even when C.Fn-13-1/2 has been set to limit
the selectable focusing points to 11. (->p. 106)
When C.Fn-13-3 has been used to limit the selectable focusing points to 9, a
focusing point cannot be registered, (-^p. 106)
“SEL” stands for Select, and “HP” stands for “Home Position.”
Switching to the Registered Focusing Point
Normally, you press the button and button simultaneously to
switch to the registered focusing point. Flowever, with C.Fn-18-1/2
(->p.109), you can just press the <[x]> button to switch to the registered
focusing point. See “Setting Custom Functions” on page 96.
(1) Press only the button to
switch to the registered focusing
point. ftilSBRBI (^109)
(2) Switch to the registered focusing
point only while pressing the
H109)
< x>.
G.Fn-18-2
• When the is released, it will
return to the original focusing point.
(3) Press the button and <[1D>
button simultaneously.
• This is the default method with C.Fn-
18-0.
il If no focusing point has been registered, the above steps will switch it to the
center focusing point.
If C.Fn-18-1/2 and C.Fn-4-1/3 have been set, you can press only the <153> to
switch to the registered focusing point and start autofocusing at the same time.
43