Canon EOS 1 V HS - Manual (Page 107)

Custom Function Settings
C.Fn-11 Focusing point selection method
This converts the < t ^ > button or
< f e l >
button into the
can thereby position the focusing point selector according to your personal
preference. The <0> dial can also be used to select a horizontal or
vertical focusing point.
C.Fn Function No. Description
0 5
<-> < RTl > + < >
X + <0>
1
h;;r| > -F < >
C.Fn-11
Focusing point Z +
selection method
p
rTTiri
l*****l
^ <0> stand-alone operation
X + <^>
Q
1
< F E L >
-F
o
• • 1
X
< F E L >
-F
<
0
>
C.Fn-11- 1; This reverses the functions of the button and < 1^>
button. Press the < > button, then turn the < > dial to
select a horizontal focusing point or turn the dial to select
a vertical focusing point.
C.Fn-11-2; While exposure metering is active, turn the <0> dial to
select a horizontal (or peripheral focusing point with C.Fn-
13-3 set) focusing point. This is also possible while you press
the shutter button halfway during Al Servo AF.
To select a vertical focusing point, hold down the <[>3> button
and turn the <
> dial. (If C.Fn-18-1/2 has been set, a vertical
focusing point cannot be selected in this way.)
Turning the dial beyond the peripheral focusing point will not
select any other focusing point.
C.Fn-11-1 operations are also possible.
Pressing the button during autofocusing will switch
to the automatic focusing point selection mode.
C.Fn-11 -3: This reverses the functions of the button and <
fel >
button. Press the < fel > button, then turn the dial to
select a horizontal focusing point or turn the <0> dial to select
a vertical focusing point.
I
105