Turn the < > dial to set the, 0□’□■q 0 – Canon EOS 1 V HS User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Film ID Imprinting
o
Be sure to set the user-settable No. before loading the film. The film ID is
imprinted automatically as it advances to frame 1 after loading. You cannot set
the user-settable No. once the film has been loaded. You also cannot set the
film roll No.
□ _Q.0_0 O.O.O □ □ □ □ □ □ O O O
I
\
User-settable No.
I
Film roll No.
ca
Dn,
Imprinting position-!
0
□’□■Q 0
□ o o o o o o o
M.Fn: Multi Function. This
refers to the EOS-1 V’s
extended functions.
User-settable No.
Film roll No.
Press the
< M.Fn >
button to set the
film ID setting mode.
• Each time you press the button, the
following icons will be displayed in
turn on the left side of the LCD panel.
Display the ID icon. _
ID icon-
PF icon-
Data transfer icon -
fID
► The blinking number is the user-
settable No.
• After the film advances to frame 1,
the user-settable No. will be
displayed and it cannot be changed.
Turn the <
> dial to set the
desired user-settable No.
• You can set any number from
00
to
o o
• The film roll No. is set sequentially
from
00 I
to
00B.
After
000
, it will
start from
00 I
again.
23