HP Netserver L Server series - Manual (Page 68)

Appendix B Regulatory Information
Declaration of Conformity (US, EU, Australia)
DECLARATION OE CONEORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's/Supplier Name:
Manufacturer's/Supplier Address:
deelares, that the produet
Hewlett-Packard Company
5301 Stevens Creek Blvd,
Santa Clara, CA 95052 USA
Product Name: Network Server
Model Number(s): HP NetServer EC 11
Product Optious: ALL
couforms to the followiug Product Specificatious:
Safefi': lEC 950: I99I+AI, A2, A3, A4 / EN 60950: 1992+AI, A2, A3
EMC: C1SPR22:I993 /EN 55022:1994
EN 50082-1:1992 - Generic Immunity
lEC 801-2:1991,4 kV CD, 8 kV AD
lEC 801-3:1984,3 V/m
lEC 801-4:1988, 0,5 kV Signal Lines, I kV Power Lines
FCC Title 47 CFR, Part 15
AZ/NZS 3548 (C1SPR22/EN55022) Information Technology Equipment
(Australia Supplier Code N279)
Supplementary Information:
1) The product was tested in a typical configuration with Hewlett-Packard peripherals,
2) Models were configured with a network interface board and shielded twisted-pair data cable,
3) The product complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
The product herewith complies with the requirements of the following directives and carries the CE marking
accordingly:
- EMC Directive 89/336/EEC including CE Marking Directive 93/68/EEC
- Low Voltage Directive 73/23/EEC
Santa Clara, September 5, 1997
Nigel Marrion/Quality Manager
North American Contact: Hewlett-Packard Company Product Regulations Manager
3000 Hanover Street, Palo Alto, CA 94304 Phone: 415-857-1501
European Contact: Your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department ZQ / Standards Europe, Herrenberger Straße 130, D-7030 Böblingen (FAX: + 49-7031
Australian Contact: Theodore Polites, Regional Product Regulations Manager,
Qualit>' Management Services & Systems Phone: ++ 61 3 9272 8355
62