Install accessory boards, Install all accessory boards – HP Netserver L Server series User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 1
Installation Overview
Install Accessory Boards
Install all accessory boards at this time. The backplane in the HP NetServer has
live PCI-only slots (Slots 2-6) and one combined PCI/ISA slot (Slot 1).
Boards can be identilied by the shape of their connectors, as shown in Figure 1-5.
PCI Board —
left-side offset
ISA Board —
right-side offset
Figure 1-5. PCI/ISA Board Identification
For a list ofboards HP has tested, view the Tested Products List located in the
following:
• HP Order Assistant on the HP Web Site at
• Help topic "Tested Products List" on the HP Navigator CD-ROM
For tips on con^guring accessory boards, refer to the following:
• The Readme ^le on the Navigator CD-ROM
•
Con^guration advisories in Con^guration Advisor. To read them, do the
following:
a. From the HP Navigator Main Menu, select Configuration Assistant
and Installation Advisor.
b. From the Con^guration Assistant menu, select Custom.
c. Select the NOS (network operating system) you plan to install later, and
the version, if necessary.
d. To the question, "Would you like to use HP's automated mode ofNOS
installation?" select No.
10