HP Netserver L Server series - Manual (Page 39)

Chapter 4 Accessories
11. Use the up and down arrow keys to select the DMA channel that
corresponds to the DMA channel required for the ISA board you are
installing, and press the + or - key on the keypad to reserve it. Reserve all
DMA channels needed for the board.
12. When all the necessary DMA channels are reserved, press ESC to return to
the DSA non-Plug-and-Play Devices submenu.
13. Usethe up and down arrow keys to highlight I/O Resources, and press
ENTER to select that submenu.
14. Use the up and down arrow keys to highlight the I/O port block that
corresponds to the D/O port range required by the board you are installing,
and press the + or - key on the keypad to reserve that block. If the D/O port
range required for the board spans two or more blocks shown on the screen,
reserve all blocks required by the board. Df the D/O port range required for
the board is less than one block, select the whole block that contains the
range.
15. When all the necessary D/O port blocks are reserved, press ESC to return to
the DSA non-Plug-and-Play Devices submenu.
16. Use the up and down arrow keys to highlight Interrupt Resources, and
press ENTER to select that submenu.
17. Use the up and down arrow keys to highlight the DRQ that corresponds to
the DRQ required for the board you are installing, and press the + or - key
on the keypad to reserve that DRQ. Reserve all DRQs needed for the board.
18. When all the necessary DRQs and other resources are reserved, press the
F10 function key to save and exit.
19. Dn the Setup Con^*mation dialog box, press ENTER to answer "Yes" to the
question, "Save con^guration and exit now?" The HP NetServer will
reboot.
NOTE Df you change your mind and want to exit the Setup utility
without making the changes you have selected, press ESC once
or twice to return to the Setup Utility menu. Use the right arrow
key to select the Exit menu. Use the down arrow key to
highlight Exit Discarding Changes. Dn the Setup Warning
dialog box, use the spacebar or right arrow key to highlight No.
Press ENTER to answer "No" to the question, "Con^guration
has not been saved! Save before exiting?"
33