Dell Precision M60 - Manual (Page 89)

If you have problems with a hard drive
PC Card Problems
Smart Card Problems
Disable standby or hibernate mode in Windows before writing to a CD-RW — Search for the keyword standby or hibernate in Windows
Help or the Windows Help and Support Center .
Change the write speed to a slower rate — See the help files for your CD or DVD creation software.
Exit all other open programs — Exiting all other open programs before writing to the CD-RW or DVD+RW may alleviate the problem.
Allow the computer to cool before turning it on — A hot hard drive may prevent the operating system from starting. Try allowing the
computer to return to room temperature before turning it on.
Check the drive for errors —
l Run the Windows error-checking tool:
1. In Windows XP, click the Start button and click My Computer. In Windows 2000, double-click My Computer.
2. Right-click the drive letter (local disk) that you want to scan for errors, and then click Properties.
3. Click the Tools tab.
4. Under Error-checking, click Check Now.
5. Click Start.
l Run the IDE Drives tests as described in the Dell Diagnostics .
Check the PC Card — Ensure that the PC Card is properly inserted into the connector.
Ensure that the card is recognized by Windows — Double-click the Unplug or Eject Hardware icon in the Windows taskbar. Ensure that
the card is listed.
Run the PC Card diagnostics test — See the documentation that came with the PC Card for instructions if a diagnostics test was provided
with the card.
If you have problems with a Dell-provided PC Card — Contact De ll.
If you have problems with a PC Card not provided by Dell — Contact the PC Card manufacturer.
Check the smart card — Ensure that the smart card is properly inserted into the smart card slot.
If you have problems with a Dell-provided smart card — Contact Dell .
If you have problems with a smart card not provided by Dell — Contact the smart card manufacturer.