Dell Precision M60 - Manual (Page 31)

7. When the operating system recognizes the new device, click Close.
Using the CD or DVD Tray
1. Press the eject button on the front of the drive.
2. Pull the tray out.
3. Place the disc, label side up, in the center of the tray.
4. Snap the disc onto the spindle.
5. Push the tray back into the drive.
You can play a DVD on your computer if the computer shipped with a DVD drive or a CD-RW/DVD combo drive. You can write data to a blank CD on your
computer if the computer shipped with a CD-RW or CD-RW/DVD combo drive.
For more information on playing CDs or watching movies, click Help on the CD player or DVD player (if available).
Adjusting the Volume
1. Click the Start button, point to All Programs® Accessories® Entertainment (or Multimedia), and then click Volume Control.
2. In the Volume Control window, click and drag the bar in the Volume Control column and slide the bar up or down to increase or decrease the volume.
For more information on volume control options, click Help in the Volume Control window.
The Volume Meter displays the current volume level, including mute, on your computer. Either right-click the icon in the taskbar or press the volume
control buttons to enable or disable the Volume Meter on the screen.
NOTICE: Do not press down on the drive tray when opening or closing it. Keep the tray closed when you are not using the drive.
NOTICE: Do not move the computer while playing CDs or DVDs.
1 eject button
NOTE: If you use a module bay that shipped with another computer, you need to install the drivers and software necessary to play DVDs or write data.
For more information, see the Drivers and Utilities CD.
NOTE: If the speakers are muted, you do not hear the CD or DVD playing.