Dell Precision M60 - Manual (Page 27)

6. Pull the device out of the module bay.
7. Insert the new device into the bay, and push the device until you feel a click.
8. Replace the device screw.
9. Turn on the computer.
Removing and Installing Devices While the Computer Is Running
Your computer ships with an optical drive installed in the module bay. However, the device screw is not installed in the optical drive but packaged separately.
When you install your device in the module bay, you can install the device screw.
If the Device Screw Is Not Installed
Microsoft ® Windows ® XP
1. Double-click the Safely Remove Hardware icon on the taskbar.
2. Click the device you want to eject.
1 device latch release
NOTICE: Insert devices into the module bay before you dock and turn on the computer.
NOTE: If the device screw is not installed, you can remove and install devices while the computer is running and connected to a docking device
(docked).
NOTE: You do not need to install the device screw unless you want to secure the module inside the computer for security purposes.
NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or
placing heavy objects on top of them.