Dell POWEREDGE M1000E - Manual (Page 67)

Fabric OS MIB Reference 47
53-1002750-01
UDP group
2
UDP group
Implementation of the UDP group is mandatory for all systems that implement the UDP.
tcpConnState
1.3.6.1.2.1.6.13.1.1 Read-write The state of this TCP connection.
The only value that might be set by a management station is deleteTCB
(12). Accordingly, it is appropriate for an agent to return a badValue
response if a management station attempts to set this object to any
other value.
If a management station sets this object to the value delete12 (TCB),
then this has the effect of deleting the TCB (as defined in RFC 793) of
the corresponding connection on the managed node, resulting in
immediate termination of the connection.
As an implementation-specific option, a RST segment might be sent
from the managed node to the other TCP endpoint (note, however, that
RST segments are not sent reliably).
Valid values:
•
closed
•
listen
•
synSent (3)
•
synReceived (4)
•
established (5)
•
finWait1 (6)
•
finWait2 (7)
•
closeWait (8)
•
lastAck (9)
•
closing (10)
•
timeWait (11)
•
deleteTCB (12)
NOTE: Fabric OS v3.1.x and v4.x do not allow the SET operation on
this variable.
tcpConnLocalAddress
1.3.6.1.2.1.6.13.1.2 Read only The local IP address for this TCP connection. In the case of a
connection in the listen state that is willing to accept connections for
any IP interface associated with the node, the value 0.0.0.0 is used.
tcpConnLocalPort
1.3.6.1.2.1.6.13.1.3 Read only The local port number for this TCP connection.
tcpConnRemAddress
1.3.6.1.2.1.6.13.1.4 Read only The remote IP address for this TCP connection.
tcpConnRemPort
1.3.6.1.2.1.6.13.1.5 Read only The remote port number for this TCP connection.
tcpInErrs
1.3.6.1.2.1.6.14 Read only The total number of segments received in error (for example, bad TCP
checksums).
tcpOutRsts
1.3.6.1.2.1.6.15 Read only The number of TCP segments sent containing the RST flag.
TABLE 13
Object and OID Access Description