Dell POWEREDGE M1000E - Manual (Page 156)

136 Fabric OS MIB Reference
53-1002750-01
sw traps
6
The swSsn variable is optional in trap messages.
Select either the previous behavior in which the Enterprise field is taken from sysObjectID or the
new behavior in which the value in the Enterprise field will always be “sw”:
• Set the value of this variable to 0, to use the sysObjectID.
• Set the value to 1 to use the fixed enterprise value, “sw” (1.3.6.1.4.1.1588.2.1.1.1.).
TABLE 43 SW-MIB traps
Trap name Commands to configure
“swFault” on page 137
(not supported)
N.A.
“swSensorScn” on page 137 N.A.
“swFCPortScn” on page 137 Always on
“swEventTrap” on page 138 For more information, refer to the snmpConfig command in the Fabric OS
Command Reference.
“swFabricWatchTrap” on
page 138
Fabric OS Command: portthconfig, thconfig, sysmonitor --config
“swTrackChangesTrap” on
page 139
Fabric OS Command: trackChangesSet and trackChangesShow
“swIPv6ChangeTrap” on
page 139
For more information, refer to the snmpConfig command in the Fabric OS
Command Reference.
“swPmgrEventTrap” on page 139
“swFabricReconfigTrap” on
page 139
“swFabricSegmentTrap” on
page 140
“swExtTrap” on page 140
“swStateChangeTrap” on
page 140
“swPortMoveTrap” on page 140
“swBrcdGenericTrap” on
page 140
“swDeviceStatusTrap” on
page 140