Dell POWEREDGE M1000E - Manual (Page 171)

Fabric OS MIB Reference 151
53-1002750-01
Switch agent configuration group
6
Switch agent configuration group
swPmgrEventDescr
1.3.6.1.4.1.1588.2.1.1.1
.2.14 Not
accessible This object identifies the textual description of the events mentioned in
swPmgrEventType.
swVfId
1.3.6.1.4.1.1588.2.1.1.1
.2.15 Read only The virtual Fabric ID of the switch.
swVfName
1.3.6.1.4.1.1588.2.1.1.1
.2.16 Read only This represents the virtual switch name configured in the switch.
TABLE 48
Object and OID Access Description
TABLE 49
Object and OID Access Description
swAgtCfg
1.3.6.1.4.1.1588.2.1.1.1
.4 Not
accessible The OID sub-tree for switch agent configuration group.
swAgtCmtyTable
1.3.6.1.4.1.1588.2.1.1.1
.4.11 Not
accessible A table that contains, one entry for each community, the access control
and parameters of the community.
The table displays all of the community strings (read and write) if it is
accessed by the “write” community string. Only “read” community
strings are displayed if it is accessed by the “read” community string.
In Secure Fabric OS, the community strings can only be modified on the
primary switch.
NOTE: This table is deprecated in Fabric OS v7.0. Use the tables
snmpTargetAddrTable, snmpTargetParamsTable,
snmpCommunityTable to get the required data.
swAgtCmtyEntry
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1 Not
accessible An entry containing the community parameters.
swAgtCmtyIdx
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1.1 Read only The SNMPv1 community entry.
The return value for this entry is 1 through 6.
swAgtCmtyStr
1.3.6.1.4.1.1588.2.1.1.1
.4.11.1.2 Read-write This is a community string supported by the agent. If a new value is set
successfully, it takes effect immediately.
Default values for communities are as follows:
•
1 (Secret Code)
•
2 (OrigEquipMfr)
•
3 (private)
•
4 (public)
•
5 (common)
•
6 (FibreChannel)
Community strings 1-3 are read-write and strings 4-6 are read only.
You can change the community setting using the snmpconfig command.