Dell POWEREDGE M1000E - Manual (Page 155)

Fabric OS MIB Reference 135
53-1002750-01
sw traps
6
sw traps
This section contains descriptions and other information that is specific to sw traps.
From Fabric OS v6.2.0, the sw traps will have an extra binding associated to indicate the Virtual
Fabric (VF). The traps will have a Virtual Fabric ID (VFID) associated with them.
For the fourteen traps defined in the SW-MIB and how to configure the trap, refer to Table 43 .
EportUtil and EportPktl are the MIB defines used for VE ports for Legacy FCIP (FR4-18i router blade/Brocade 7500), while VEPortUtil and
VEPortPktlLoss are used for VE ports for Brocade 7800 Extension Switch/FX8-24 DCX Extension Blade.
In the index swFwEnvTemp, Env refers to Environment class and Temp refers to the area Temperature.
SwFwWriteVals Integer Write-only variable for applying or canceling values or action matrix changes:
1 swFwCancelWrite
2 swFwApplyWrite
SwFwTimebase Integer Timebase for thresholds:
1 swFwTbNone
2 swFwTbSec
3 swFwTbMin
4 swFwTbHour
5 swFwTbDay
SwFwStatus Integer Status for thresholds:
1 disabled
2 enabled
SwFwEvent Integer Possible events available:
1 started
2 changed
3 exceeded
4 below
5 above
6 inBetween
7 lowBufferCrsd
SwFwBehavior Integer Behavior type for thresholds:
1 triggered
2 continuous
SwFwState Integer State type for last events:
1 swFwInformative
2 swFwNormal
3 swFwfaulty
SwFwLicense Integer Fabric Watch License state:
1 swFwLicensed
2 swFwNotLicensed
TABLE 42 SW-MIB textual conventions (Continued)
Type definition Value Description