Dell POWEREDGE M1000E User Manual
Page 75
Fabric OS MIB Reference
55
53-1002750-01
Generic traps
2
linkDown
1.3.6.1.6.3.1.1.5.3
A linkDown trap signifies that the sending protocol entity recognizes a failure in one of
the communication links represented in the agent's configuration.
This trap is generated for the following ports:
•
FCIP GE ports [Brocade 7800E/Brocade 7500/FR4-18i router blade/FX8-24 DCX
Extension Blade]
•
ISCSI GE ports [FC4-16IP]
•
FCOE 10G ports [Brocade 8000, FCOE10-24 DCX Blade]
•
FCIP xGE ports [FX8-24 DCX Extension Blade]
•
FCIP tunnel on GE ports
•
FCIP tunnel on xGE ports
•
FCIP GE ports - copper
This trap is generated for the following switch events:
•
portdisable
•
fcoe -disable [for FCOE ports]
Varbinds for this trap are as follows:
•
ifIndex
•
ifAdminStatus
•
ifOperStatus
linkUp
1.3.6.1.6.3.1.1.5.4
A linkUp trap signifies that the sending protocol entity recognizes that one of the
communication links represented in the agent's configuration has come up.
This trap is generated for the following ports:
•
FCIP GE ports [Brocade 7800E/Brocade 7500/FR4-18i router blade/FX8-24 DCX
Extension Blade]
•
ISCSI GE ports [FC4-16IP]
•
FCOE 10G ports [Brocade 8000, FCOE10-24 DCX Blade]
•
FCIP xGE ports [FX8-24 DCX Extension Blade]
•
FCIP tunnel on GE ports
•
FCIP tunnel on xGE ports
•
FCIP GE ports - copper
This trap is generated for the following switch events:
•
portenable
•
fcoe -enable
Varbinds for this trap are as follows:
•
ifIndex
•
ifAdminStatus
•
ifOperStatus
authenticationFailure
1.3.6.1.6.3.1.1.5.5
An authenticationFailure trap signifies that the sending protocol entity is the
addressee of a protocol message that is not properly authenticated. While
implementations of the SNMP must be capable of generating this trap, they must also
be capable of suppressing the emission of such traps through an
implementation-specific mechanism.
This trap is generated when you perform GET or SET with invalid community strings
(snmpv1).
NOTE: authTraps must be enabled in the switch with the command: snmpconfig -set
systemgroup.
TABLE 17
Trap name and OID
Description