Dell POWEREDGE M1000E - Manual (Page 201)

Fabric OS MIB Reference 181
53-1002750-01
High-Availability group
7
High-Availability group
This section describes the MIB objects in the High-Availability group.
FRU table
DisplayString SNMPv2-TC
TimeStamp
TABLE 62 Objects imported into the HA-MIB (Continued)
Object Imported from this module
TABLE 63
Object and OID Access Description
haStatus
1.3.6.1.4.1.1588.2.1.2.1
.1 Read only Indicates whether the system is redundant.
Possible values are:
•
redundant (0) Dual CP with standby CP ready to take over.
•
nonredundant (1) Single or Dual CP system where the standby
CP is not available to take over operation of the switch.
TABLE 64
Object and OID Access Description
fruTable
1.3.6.1.4.1.1588.2.1.2.1.5 Not
accessible This table inventories the field-replaceable unit (FRU) slots
available.
This table contains an entry for each entry in the entPhysicalTable
that has entPhysicalClass set to “Container (5)” and has a child
entry having entPhysicalIsFRU set to “true (1)”.
In Fabric OS v6.1.0 and later, the chassis is marked as a FRU.
Unlike other FRUs, the chassis FRU does not have a corresponding
container entry.
Table 65 includes information on all FRUs except the chassis.
fruEntry
1.3.6.1.4.1.1588.2.1.2.1.5.1 Not
accessible An entry for FRU slot in the fruTable.
fruClass
1.3.6.1.4.1.1588.2.1.2.1.5.1.1 Read only The type of the FRU object that this slot can hold.
•
other (1)
•
unknown (2)
•
chassis (3)
•
cp (4)
•
other-CP (5)
•
switchblade (6)
•
wwn (7)
•
powerSupply (8)
•
fan (9)
•
CoreBlade (10)
•
ApplicationBlade (11)