Dell POWEREDGE M1000E - Manual (Page 281)

Fabric OS MIB Reference 261
53-1002750-01
iSCSI connection attributes table
12
iscsiCxnProtocol
1.3.6.1.2.1.142.1.1.11.1.1.6 Read only The transport protocol over which this connection is running. This is
hard coded to tcp (6).
iscsiCxnLocalPort
1.3.6.1.2.1.142.1.1.11.1.1.7 Read only The local transport protocol port used by this connection. This object
cannot have the value zero, since it represents an established
connection. This is hard coded to 3260.
iscsiCxnRemoteAddr
1.3.6.1.2.1.142.1.1.11.1.1.8 Read only The remote Internet Network Address, of the type specified by
iscsiCxnAddrType, used by this connection.
NOTE: Only IPv4 addresses are supported.
iscsiCxnRemotePort
1.3.6.1.2.1.142.1.1.11.1.1.9 Read only The remote transport protocol port used by this connection. This
object cannot have the value zero, since it represents an
established connection.
iscsiCxnMaxRecvDataSegLeng
th
1.3.6.1.2.1.142.1.1.11.1.1.10 Read only The maximum data payload size supported for command or data
PDUs able to be received on this connection.
iscsiCxnMaxXmitDataSegLengt
h
1.3.6.1.2.1.142.1.1.11.1.1.11 Read only The maximum data payload size supported for command or data
PDUs able to be sent on this connection.The value is
min(iscsiCxnMaxRecvDataSegLength, iscsiSsnMaxBurstLength).
iscsiCxnHeaderIntegrity
1.3.6.1.2.1.142.1.1.11.1.1.12 Read only This object identifies the iSCSI header digest scheme in use within
this connection.
iscsiCxnDataIntegrity
1.3.6.1.2.1.142.1.1.11.1.1.13 Read only This object identifies the iSCSI data digest scheme in use within this
connection.
iscsiCxnRecvMarker
1.3.6.1.2.1.142.1.1.11.1.1.14 Read only This object identifies whether or not this connection is receiving
markers in its incoming data stream.
This object is hard coded to false.
iscsiCxnSendMarker
1.3.6.1.2.1.142.1.1.11.1.1.15 Read only This object identifies whether or not this connection is inserting
markers in its outgoing data stream.
This object is hard coded to false.
iscsiCxnVersionActive
1.3.6.1.2.1.142.1.1.11.1.1.16 Read only Active version number of the SCSI specification negotiated on this
connection.
This object is hard coded to zero.
TABLE 98
Object and OID Access Description