Swtrackchangestrap, Swipv6changetrap, Swpmgreventtrap – Dell POWEREDGE M1000E User Manual
Page 159: Swfabricreconfigtrap
Fabric OS MIB Reference
139
53-1002750-01
sw traps
6
swTrackChangesTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.6
Trap to be sent for tracking log in, log out, or
configuration changes.
#TYPE
Track changes has generated a trap.
#SUMMARY
%s and SSN is #%s
#ARGUMENTS 0, 1
#SEVERITY
Informational
#TIMEINDEX 1
#STATE
Operational
Some of the triggers that will generate this trap are:
•
Log out
•
Unsuccessful log in
•
Successful log in
•
Switch configuration changes
•
Track changes on and off
This trap gets sent when track-changes is set to
ENABLED and is configured to send SNMP traps on
track events. Use the trackchangesset command to
enable the track changes feature and SNMP trap
mode.
swIPv6ChangeTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.7
This trap is generated when an IPv6 address status
change event occurs. It is generated only when IPv6
stateless state changes to the deprecation state and
not for address change notification.
swPmgrEventTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.8
swPmgrEventType
swPmgrEventTime
swPmgrEventDescr
swSsn
swVfId
This trap is generated when any partition manager
change happens. This trap is generated when:
•
Logical switch is created or deleted.
•
Port is moved between logical switches.
•
Switch FID changes.
•
When any logical switch is changed to base
switch.
•
VF is enabled or disabled.
swFabricReconfigTrap
1.3.6.1.4.1.1588.2.1.1.1
.0.9
The trap to be sent for tracking fabric
reconfiguration. This trap is generated under the
following circumstances:
•
Two switches with the same domain ID have
connected to one another.
•
Two fabrics have joined.
•
An E_Port has gone offline.
•
A principal link has segmented from the fabric.
•
Zone conflicts.
•
Domain conflicts.
•
Segmentation of the principal link between two
switches.
•
Incompatible link parameters. During E_Port
initialization, ports exchange link parameters.
Rarely, incompatible parameters result in
segmentation.
TABLE 44
Trap name and OID
Variables
Description