Dot1qstaticmulticastforbid denegressports, Dot1qstaticmulticaststatus, Dot1qvlan group – Dell POWEREDGE M1000E User Manual
Page 351: Dot1qvlancurrenttable, Dot1qvlancurrententry, Dot1qvlantimemark, Dot1qvlanindex, Dot1qvlanfdbid, Dot1qvlancurrentegresspo rts, Dot1qvlancurrentuntagged ports
Fabric OS MIB Reference
331
53-1002750-01
Q-Bridge MIB
18
dot1qVlan group
dot1qStaticMulticastForbid
denEgressPorts
1.3.6.1.2.1.17.7.1.3.2.1.4
Read-write The set of ports to which frames received from a specific port and
destined for a specific multicast or broadcast MAC address must not be
forwarded, regardless of any dynamic information, for example, from
GMRP.
dot1qStaticMulticastStatus
1.3.6.1.2.1.17.7.1.3.2.1.5
Read-write This object indicates the status of this entry.
Values:
•
other (1) - This entry is currently in use, but the conditions under
which it will remain so differ from the following values.
•
invalid (2) - Writing this value to the object removes the
corresponding entry.
•
permanent (3) - This entry is currently in use and will remain so
after the next reset of the bridge.
•
deleteOnReset (4) - This entry is currently in use and will remain
so until the next reset of the bridge.
•
deleteOnTimeout (5) - This entry is currently in use and will remain
so until it is aged out.
TABLE 129
Object and OID
Access
Description
dot1qVlanCurrentTable
1.3.6.1.2.1.17.7.1.4.2
Not
accessible
A table containing current configuration information for each VLAN
currently configured into the device by (local or network) management,
or dynamically created as a result of GVRP requests received.
dot1qVlanCurrentEntry
1.3.6.1.2.1.17.7.1.4.2.1
Not
accessible
Information for a VLAN configured into the device by (local or network)
management, or dynamically created as a result of GVRP requests
received.
dot1qVlanTimeMark
1.3.6.1.2.1.17.7.1.4.2.1.1
Not
accessible
A time filter for this entry.
dot1qVlanIndex
1.3.6.1.2.1.17.7.1.4.2.1.2
Not
accessible
The VLAN ID or other identifier referring to this VLAN.
dot1qVlanFdbId
1.3.6.1.2.1.17.7.1.4.2.1.3
Read only
The filtering database used by this VLAN.This is one of the dot1qFdbId
values in the dot1qFdbTable. This value is allocated automatically by
the device whenever the VLAN is created: either dynamically by GVRP,
or by management, in dot1qVlanStaticTable.
dot1qVlanCurrentEgressPo
rts
1.3.6.1.2.1.17.7.1.4.2.1.4
Read only
The set of ports that are transmitting traffic for this VLAN as either
tagged or untagged frames.
dot1qVlanCurrentUntagged
Ports
1.3.6.1.2.1.17.7.1.4.2.1.5
Read only
The set of ports that are transmitting traffic for this VLAN as untagged
frames.
TABLE 128
Object and OID
Access
Description